Sig Sauer ALPHA6 34mm Scope Ring Set, Extra High Height 1.25 in, Aluminum, Matte Black

Key Features

• Fits riflescopes with a 34mm main tube
• Extra High height of 1.25 inches, measured from the centerline of the scope to the top of the Picatinny rail
• Machined from billet aluminum alloy, listed by Sig Sauer as 6061-T6
• Flat black Type III hard anodized finish
• Hardened steel hardware with a black oxide coating
• Clamps to M1913 Picatinny and Weaver style rails, 0 MOA cant
• Torque specs from Sig Sauer: 65 in-lbs to the rail (1/2 inch socket), 25 in-lbs on the scope (T15 Torx)
• Scope leveling tool kit included, backed by the Sig Sauer Infinite Guarantee

Description

The Sig Sauer ALPHA6 ring set mounts a riflescope with a 34mm main tube to an M1913 Picatinny or Weaver style rail. This is the extra high height version, which places the center of the scope 1.25 inches above the top of the rail. Sig also offers this 34mm ring in medium and high (1.12 inch) heights, so check which height your scope and rifle combination needs before ordering.

Each ring is machined from billet aluminum, listed by Sig as 6061-T6, and finished in a flat black Type III hard anodize. The fasteners are hardened steel with a black oxide coating. Sig describes the alloy as ductile enough to conform to the scope tube without marking it when installed correctly. The rings add no built in cant, so they sit at 0 MOA. As the tallest ring in the 34mm lineup, it offers the most room under the scope for large objective lenses and a more upright head position.

Installation uses a 1/2 inch socket on the rail clamp nuts and a T15 Torx bit on the ring cap screws. Sig specifies 65 inch pounds to the rail and 25 inch pounds on the scope. A scope leveling tool kit comes with this ring set to help square the reticle during mounting. The rings are covered by the Sig Sauer Infinite Guarantee.

Specs

In the Box

• ALPHA6 scope rings (set of 2)
• Scope leveling tool kit

SIG-SOA64004